Measured, not assumed
Clear width, height, headroom, side room, traffic and exposure are taken at the opening before a product type or drive is proposed.
About
Standard Automatic Solutions Pvt. Ltd.
A Pune-based manufacturer and supplier of entrance automation, industrial doors, rolling shutters, fire rated assemblies, loading bay equipment and access control systems.
01The company
Founded in Pune, in 2006.
Standard Automatic Solutions Pvt Ltd was established in 2006 in Pune, Maharashtra. The company manufactures and supplies rolling shutters, automatic sliding and swing gates, industrial and automatic doors, road and access barriers, and provides entrance automation installation services.
The published range covers 38 products across 8 families and 25 categories, from the vehicle gate at a site boundary through to the pedestrian lane in a building lobby.
The company is an ISO 9001:2015 registered organisation and operates from Pune, Maharashtra.
In its own words, the company is “engaged in manufacturing and supplying a comprehensive assortment of the best quality Automatic Rolling Shutters to Automatic Sliding Gates, Doors, Swing Gates, Road Barriers”, manufactured from “finest grade raw material” and built for “excellent finish, corrosion resistance, reliable performance, robust construction, extended durability and ability to withstand extreme weather conditions”. Those are the properties the product pages on this site are written against: which curtain thickness, which coating, which retention and which drive, and why.
Two things have not changed since 2006. Every assembly is made to the surveyed opening rather than adapted from a stock size, and the company installs and commissions what it supplies, so the drive sizing, limit setting and safety devices are set by the people who built the door.
02What we make
8 product families, one discipline.
Every family answers the same question - how an opening is closed, secured and moved through - for a different kind of opening. Each family page states what is fixed, what is configured and what is confirmed at survey.
High Speed Doors
Seconds per cycle on the openings that never stop moving.
7 products
Industrial Doors
Insulated panels that stack overhead and free the whole opening.
3 products
Rolling Shutters
The curtain rolls above the lintel and the opening stays clear.
11 products
Fire & Safety Doors
Holding the compartment line when a large aperture cuts through it.
2 products
Automatic Gates
The vehicle line at the boundary, opened without anyone getting out.
4 products
Entrance Automation
Hands-free pedestrian entrances that hold the building envelope.
3 products
Loading Bay Equipment
A joint between two structures that never quite line up.
2 products
Access Control & Vehicle Barriers
One authorised movement at a time, on foot and on wheels.
6 products
03Who we work for
Eight industries, each with its own failure mode.
The opening that fails in a cold store is not the one that fails in a car plant. The industry pages set out what usually goes wrong on each kind of site and which products are specified against it.
Trusted partners
80 organisations
Manufacturers, developers, institutions and public bodies from our project records, shown by name and logo only. We publish who we have worked for, not what we did for them.
See the listManufacturing
Separating processes without slowing the material flow between them.
Warehousing & Logistics
Every second an opening stands open is conditioned air and pedestrian risk.
Cold Chain & Food Processing
Holding a temperature differential across an opening that never stays shut.
Pharmaceutical & Cleanroom
Controlled transitions where the door is part of the classification.
Automotive
Line-side openings where a stopped door stops the line.
Retail & Commercial
Frontages that have to secure without going blank, and lobbies that have to flow.
Healthcare
Corridors carrying beds and trolleys, doors carrying compartment lines.
Infrastructure & Transit
Peak-flow entries and perimeter points with nobody watching them.
04What we stand behind
What a specification from us means.
Figures we can support
Every product page publishes the fields a specifier needs. A figure appears where we can stand behind it; where it depends on the opening or a certificate, the entry says so instead of guessing.
Ratings only with certificates
No fire rating, wind class or performance class is published without the certificate for the tested assembly. Ask for it and we will send it.
Commissioned and tested
Limits, forces, photocells, safety edges and spring-break or anti-fall devices are set and tested at handover, then supported with service, spares and maintenance.
05On the record
What we can put our name to.
Company pages in this market are full of numbers nobody can check. Everything below is either published by the company itself or taken from the data behind this site, and we would rather show you five things we can stand behind than fifty we cannot.
Established
2006
20 years of manufacturing and installing entrance automation from Pune, Maharashtra, as stated in the company's own published material.
Quality system
ISO 9001:2015
Published by the company as an ISO 9001:2015 registered organisation. Certificate details on request.
Trusted partners
80 organisations
Manufacturers, developers, institutions and public bodies from our project records, listed by name and logo on the Trusted Partners page.
Range
38 products
Across 8 families and 25 categories, each with a published specification table that says what is fixed, what is configured and what is confirmed at survey.
Made and installed by us
Survey to support
Every assembly is made to the surveyed opening, installed and commissioned by our own teams, and supported with service, spares and maintenance afterwards.
Our rule
Evidence first
We publish no figure we cannot support - no ratings without certificates, no totals without records. Ask us for anything not shown here and we will tell you what we can evidence.
06How we work
Survey, specify, manufacture, install, support.
- 01
Survey
The opening is measured and assessed in place before anything is proposed.
- 02
Specify
Product type, drive sizing and safety layer follow from the survey constraints.
- 03
Manufacture
Assemblies are made to the surveyed dimensions rather than cut down from a stock size.
- 04
Install
Installation, commissioning, limit setting and safety device testing.
- 05
Support
Handover, then service, spares and maintenance afterwards.
07Where we are
Pune, Maharashtra.
The office is in Bavdhan, on the western side of Pune. Site surveys, installation and service are carried out by our own teams; send us the opening and we will tell you when we can come and measure it.
- Head office
- 215, Business Square, Opp. DSK Ranwara, Bavdhan, Pune 411021, Maharashtra
- Telephone
- +91 8888 100 280
Get in touch
Let's automate your next entrance.
Send us the opening — width, height, traffic and site conditions — and we will come back with a specification and a quotation.